The Central Microscopy Facility supply year round and summer investigators as well as courses with instrumentation, some owned by MBL and some on loan, so please read through this guide to familiarize yourself with the Facility. Feel free to contact the Facility personnel for more information. Some of the CMF rooms are on the MBL One Card access system. You will need to get CMF authorization for your card to work on those CMF doors.
Scheduling Time and Trainings:
We use an on-line system by Stratocore for scheduling time and for setting up training sessions on individual microscopy systems. See this page for instructions.
TEM JEOL JEM-200CX
80-200KV TEM equipped with:
- Low magnification mode (+/- 60 degrees tilt and 300 degree rotation)
- standard specimen cartridge and goniometer specimen cartridge
- AMT digital side mount and bottom mount cameras
The charge is $30 per hour.
SEM Zeiss Supra40VP
0.1 – 30kV SEM equipped with:
- field emission source for high resolution
- digital image acquisition
- Oxford Instruments Inca Synergy 350 Energy Dispersive X-ray (EDS) microanalysis system
- HKL Premium electron backscatter diffraction (EBSD) system
- Leica cryo preparation and cryo stage components.
The charge is $30 per hour for standard SEM and an additional $20 per hour for cryoSEM and EDS.
LIGHT OPTICS LABORATORIES; including widefield, confocal and image analysis
Microscopic and photomicrographic equipment is available year round some of it through the courtesy of Carl Zeiss, Inc. The latest in optical microscopy equipment for such techniques as phase, dark-field, fluorescence, polarization, reflected light, and DIC are available.
Widefield Zeiss AxioImager Z2
Upright microscope set up for transmitted light techniques such as brightfield, phase and DIC. Also set up for epi-fluorescence with a Colibri LED illuminator and mercury halide lamp. Includes a motorized stage, 506 mono and 503 color digital cameras. Managed with Zeiss Zen software for acquisition and analysis.
Microdissection and Optical Laser Tweezers Zeiss Combi PALM
Microdissection and optical laser tweezers paired with the Axiovert 200M inverted microscope. Equipped with a digital camera. This unit is capable of catapulting (dissecting) single cells off a cover slip and into microtube caps. It is also capable of manipulating cells through the medium with a laser beam.
Stereo Zeiss Discovery V.12
Stereo dissecting microscope set up for transmitted light techniques with a VisiLED base and reflected light with a fiber optic illuminator. Includes a fluorescence module, Mrc5 camera and controlled with AxioVision software.
Stereo Zeiss Discovery V.16
Stereo dissecting microscope set up for fiber optic transmitted light techniques and reflected light with fiber optic illuminator. Includes a motorized stage, fluorescence module, 503 color camera and controlled with Zen software.
The LC-PolScope unit is mounted on the Axiovert 200M. It is a quantitative imaging system that measures and displays the birefringent structure in transparent objects with computer controlled polarized LM techniques.
Widefield Nikon 50i
Upright microscope set up for brightfield transmitted light technique. Also set up for epi-fluorescence with a LED illuminator. Includes color digital cameras. Managed with Nikon Elements software for acquisition and analysis.
Standard light microscopy and image analysis is charged at $10.00 per hour.
CONFOCAL MICROSCOPY SYSTEMS
Zeiss LSM-710 NLO – Inverted
The MBL has a Zeiss LSM-710 NLO laser scanning confocal system. The Zeiss 710 LSM has three independent simultaneous spectral detection channels for reflection and fluorescence and an extra detector for transmitted light. System is capable of confocal imaging using 7 visible lines – 405, 458, 488, 514, 561, 594 and 633 nm as well as two photon excitation using the Coherent Chameleon Vision II laser. The non-descanned system includes a 2 channel GaAsP detector for reflected light and a 2-channel module on the transmitted path. This system operates with the ZEN software interface. The Zeiss 710 LSM is configured on an inverted Observer Z1 microscope with a motorized stage along with a variety of objectives and a complete incubator chamber system.
Zeiss LSM-510 NLO META – upright
The MBL has a LSM-510 NLO with META detector laser point scanning confocal system configured on a fixed stage Axioskop 2FS microscope with a variety of objectives and a custom motorized stage. It is configured for electrophysiology with Sutter MP-285 manipulators, Axon Instruments Digidata 1440A, Multiclamp 700A and Axoclamp-2B. The Zeiss 510 LSM has three independent simultaneous confocal channels for reflection and fluorescence and an extra detector for transmitted light. System is capable of confocal imaging using 6 visible lines – 458, 477, 488, 514, 543 and 633 nm as well as two photon excitation using the Coherent Chameleon laser. This system operates with the ZEN or AIM software interface.
Zeiss LSM-780 Quasar – Inverted
The MBL has a Zeiss LSM-810 laser scanning confocal system. The Zeiss 780 LSM has the 34 spectral detection AsAsP channels Quasar detector for reflection and fluorescence and an external detector for transmitted light. System is capable of confocal imaging using 7 visible laser lines – 405, 458, 488, 514, 561, 594 and 633 nm. Included is a module for polarization anisotropy. This system operates with the ZEN software interface. The Zeiss 780 LSM is configured on an inverted Observer Z1 microscope with a motorized stage along with a variety of objectives.
Zeiss Cell Observer SD – Inverted
The MBL has a Zeiss Cell Observer SD spinning disk confocal system. The SD has a Photometrics Evolve 512×512 camera. System is capable of confocal imaging using 4 visible lines – 405, 488, 561 and 635 nm This system operates with the Zen software interface. The Zeiss SD is configured on an inverted Observer Z1 microscope with a motorized stage along with a variety of objectives and a complete large incubator chamber system. It is mounted with electrophysiology equipment and a FRAP module.
Representative for seasonal loan:
Zeiss LSM 880
Zeiss has provided the LSM 700 laser point scanning confocal system capable of triple label fluorescence and high resolution DIC. The 700 has two independent confocal channels for reflection and fluorescence and an extra channel for transmitted light. Laser lines are 405, 458, 488, 514 and 543 nm. The Zeiss LSM 700 is configured on an inverted Observer microscope with a variety of objectives available. The system has image processing, colocalization analysis, quantitative measuring software and 3D rendering.
Nikon has provided the A1R resonant scanner laser point scanning confocal system capable of triple label fluorescence and high resolution DIC. The A1R has four independent confocal channels for reflection and fluorescence and an extra channel for transmitted light. Laser lines are 405, 457, 488, 514 and 561 nm.
Leica has provided the SP8 laser point scanning confocal system with spectral detection and white light laser.
The confocal microscope use is charged at $28.00 per hour, consumables are extra.
SUPER RESOLUTION SYSTEMS
Super resolution systems are available through Zeiss, Nikon and ASI. Contact Louie Kerr, Jim McIlvain of Zeiss or Lynne Chang of Nikon.
ELECTRONIC IMAGING FACILITIES
Universal Imaging Corporation MetaMorph and Image J
Processing and analysis systems are available and capable of interfacing with the CMF’s light and electron microscopes.
Copy stand with digital camera
Stand alone image processing stations
- PC software: Zeiss LSM confocal, UIC MetaMorph, Zeiss Zen, HKL EBSD, Fiji
Image analysis and computer use is charged at $10.00 per hour.
MakerBot Replicator 2 3D printer. Uses PLA material and is under PC computer control.
PREPARATIVE MICROSCOPY TECHNIQUE SERVICE
The Facility offers a full range of expert support including fixation, embedding, sectioning, staining and scope time. The cost for this service, excluding scope time, is $50 per hour. Inquiries should be made regarding special technique requirements.
PREPARATIVE AND ANCILLARY EQUIPMENT
Denton Vacuum evaporator equipped to:
- glow discharge
- stationary and tilting omni rotary evaporative coating and shadowing using carbon and metals
Leica MED 020 coating station:
- carbon thread and platinum sputter coating
- glow discharge
- cryo SEM prep chamber
Oxygen plasma etcher
Chemical fume hood, refrigerator, pH meter, osmometer, prep areas, Stereo viewer capable of parallax heightening, curing oven
Tousimis Samdri-780A critical point dryer with various specimen carriers (Liquid CO2 provided)
Reichert knife breaker and glass breaking pliers, dissecting microscope for block trimming, knife inspection, and specimen viewing, compound microscope, hot plates, and stains for viewing thick sections
The microtomes are located in a separate sectioning room and include:
- Ultramicrotomes: Leica UC7, Reichert Ultracut E, and Leica EM Trim, (seasonal loan of second Leica UT7)
- Leica VT1000S vibratome, Spencer sliding microtome, Sorvall JB-4 microtome and an AO 820 paraffin microtome
- Microm HM505NCryostat.
There is a $10 per hour charge for microtome use.
The CMF maintains a supply of Liquid Nitrogen for purchase by the liter.
Contact Louis Kerr at Marine Biological Laboratory, Woods Hole, Ma, 02543, Phone: (508) 289-7273, Email: email@example.com for more information.